|
|
HYPER-FLEXTM is our new, unique and technically
advanced chemical formulation for our polyurethane. It's
the newest generation of polyurethane that's thoroughly performance
tested and race proven. Our polyurethane products are
available in colors: black, blue, red and yellow, with additional
colors for our shock boots.
|
|
"Simply said... Our specially formulated
polyurethane used for our products, is the best!" |
For those applications where component twisting typically
occurs, our line of black HYPER-FLEXTM polyurethane
products contain graphite. This graphite impregnation
delivers a self-lubricated effect, reducing the need to lubricate
components. |
 |
Shown: Honda Civic coil spring front
suspension, fitted with performance HYPER-FLEXTM, replacing the weak
and short-lived original rubber.
*Improves:
Quick Off-The-Line Starts, Handling & Stopping.
|
 |
ANTI-SWAY BAR (Stabilizer Bar) END
LINKS & BUSHINGS
*Your
anti-sway bar system will work at its maximum efficiency, like
it's supposed to!
*Replaces
that original, short lived, and "too-soft" rubber
*Easy
to install with basic tools
|
Economy, increased
efficiency, and easy installation are just some of the reasons
these products are so popular. Working with our Anti-Sway Bar
End Link sets, our HYPER-FLEXTM bushings
make your vehicle's anti-sway bar system much more effective.
In effect, it's almost like buying an upscale/higher performance
anti-sway bar system! Dollar-for-dollar Energy Suspension's anti-sway
bar end links and anti-sway bar bushings offer the greatest improvement
in performance handling on cars, trucks and sport utility vehicles!
Our anti-sway bar bushings are available either as standard
type (shown at left) or greaseable type (shown below).
Sets come complete with corrosion resistant zinc and gold irradiate-plated
strong 3/8" grade 5 bolts, nylon insert lock nuts, heavy
gauge washers, and mounting brackets. Additionally, our special
formula HYPER-FLEXTM bushings
assure long lasting performance.
|
|
Our HYPER-FLEXTM Greaseable
Anti-Sway Bar Bushings feature zerk type fittings,
allowing for easy and periodic greasing with a common grease
gun. These bushings are designed with unique channels that allow
for the lubricating grease to migrate to where it is needed,
at the bushing and bar contact area. Greasing also reduces the
chance of squeaking as the bar turns during normal operation. |
|
|
|
TRANSMISSION MOUNTS
*Effectively
controls transmission torque better than stock units, especially
in high-performance applications
*Soft
enough to absorb vibrations for street use yet rugged enough
for racing. (Commonly used in stock car and drag racing.)
*Helps
control torque on heavy horsepower cars
*Maintains
proper drive shaft angle
*Made
of HYPER-FLEXTM
(Type Shown- for General Motors
vehicles. Also available for Ford Co. and Chrysler Co. vehicles.)
|
| Our replacement transmission mounts
are the best of both worlds. Soft enough for street use, yet
strong enough for racing or off-road use. The mounts for General
Motors and Fords have a unique, metal safety locking feature,
effectively controlling torque. This feature delivers the extra
strength to resist problematic torque forces. Unfortunately,
G.M. still is using a rubber version of this mount without a
safety locking feature (the same type since 1956). We believe
all of our mounts are superior to original factory types. Depending
on the vehicle, the G.M. mounts can be used on both automatic
transmissions and manual three, four, and five speeds. The interlocking
feature of the mount gives added confidence against drive train
and frame damage. |
| Shown below are the G.M. style mount on the
left and the Ford style on the right. Get
our new catalog for vehicle/transmission applications, call your
dealer or see the illustration below and simply measure your
mounts to match the measurements shown. One is required per vehicle. |
|
|
 |
EARLY G.M. STYLE MOTOR MOUNTS
Performance Polyurethane "Early
Style" Motor Mounts for 1963 to '82 Chevy 6 & 8 cyl.
RWD cars
(Also fits Chevy motored hot rods.)
|
|
|
Fits 1963-'82
Chevy 6 & 8 cyl. rear wheel drive vehicles (both small and big block) as well as 90%+
of the street rods "hot rods" with Chevy motors. Two
sizes are available.
The first and only polyurethane motor
mounts available with a (take note) safety interlock,
to effectively control high horsepower and torque! They're high-performance,
"bullet-proof" strong, yet as smooth running as O.E.M./stock.
Impervious to auto fluids. Your best and only alternative to
solid metal mounts! Choose from either chrome or zinc plated
metal. Made with HYPER-FLEXTM performance polyurethane
in black or several vibrant colors. Great for show vehicles!
-- CHECK YOUR MOUNTS- THEY MAY BE WORN! -- Call
us or get our new catalog for vehicle/engine applications, or
see the illustration below and simply measure your mounts to
match the measurements shown. Two are required.
|
At left- "Short
and Wide Size"-- Zinc Plated
# 3-1114 or Chrome # 3-1115.
At right- "Tall and Narrow Size"-- Zinc Plated
# 3-1117 or Chrome # 3-1118. |
|
|
|
CLAM SHELL STYLE MOTOR
MOUNT INSERTS
(Complete assembly
shown with reusable clam shell. Only insert is available.)
Performance Inserts for
1973 to '98 G.M. 6 & 8 cyl. RWD cars and trucks.
|
|
|
|
Again, the first and only performance
polyurethane motor mounts of this style. These insert into your
existing stock metal "clam shell" brackets. They feature
our famous HYPER-FLEXTM polyurethane surrounding
metal inserts in basic black or several vibrant colors. These
REDESIGNED mounts control high horsepower and torque better,
without having to be made of hard-running solid metal. Reusing
the clam shells is both an economical approach and allows the
shells to be plated or powder coated to any color you desire.
Great for show vehicles! CHECK YOUR MOUNTS- THEY MAY BE WORN!
Fits 1973-'98
G.M. 6 & 8 cyl. rear wheel drive cars and trucks with both small and big block motors. Two styles
are available.
The 4 Bolt Style-- #3-1116 replaces inserts of the following
G.M. type mounts:14039437, 9762326, 467422, 1001132, 10001133,
9764714, 459021 and aftermarket part number 2292. (Or call us
or get our new catalog- for vehicle/engine applications. Two
are required.)
The 3 Bolt Style-- #3-1121 replaces the inserts
of the following G.M. type mounts: 15731260, 15529451, 15529452,
15592505, 22145334 and aftermarket part number 2412. (Or call
us or get our new catalog- for vehicle/engine applications. Two
are required.)
|
 |
STRUT ROD BUSHINGS
*Helps
reduce common wheel "roll-under", which occurs when
stopping abruptly, especially when using performance tires, on
either front of rear drive vehicles
*On
front wheel drive vehicles- diminishes wheel hop and traction
loss during standing start accelerations
*Maintains
proper alignment
|
| With the increased use of higher
traction tires on today's vehicles, soft original factory rubber
bushings allows the steering axis slant (caster) to change excessively.
When braking, HYPER-FLEXTM
strut rod bushings keep the
front wheels and lower control arm assembly from literally rolling
under the car! This unwanted alignment movement also causes premature
failure of the lower control arm bushings and excess tire wear.
During standing start accelerations, our
bushings help control unwanted steering axis changes,
diminishing wheel hop and traction loss. While accomplishing
all of this they still allow the suspension to smoothly travel
throughout its full operating range, without binding. |
 |
LEAF SPRING BUSHINGS
*Helps
you be in-control, when maneuvering through turns, during standing
start accelerations, braking, over bumps and berms
*Allows
the leaf spring system to function more effectively
*Helps add more carrying
capacity to the vehicle
|
| The original factory auto manufacturers are
slowly coming around. Polyurethane is finally becoming the most
widely used leaf spring bushing material in use today. For high-performance
applications, the combination of heavy duty/performance leaf
springs and HYPER-FLEXTM polyurethane
spring bushings deliver the maximum benefit. These bushings also
improve lighter-duty leaf spring systems, adding a higher degree
of performance and durability. In either situation, you'll immediately
feel the difference in positive handling and control. |
Please select the
page of your choice below:
|
|
|
Hart's Auto 8451 Lake St.
Omaha, Ne 68134 USA --- Phone 1(402) 398-1368
---
Fax 1(402) 398-1419 --- E Mail- sales@hartsauto.com
--- Web Site-http://www.hartsauto.com --- |
|
|
