Energy Suspension offers a variety of performance polyurethane bolt-on components and suspension parts for your "street rod" or "custom ride." What is listed on this web page are several component types that are commonly purchased for hot road and custom vehicles... but since hot rod/custom vehicles are a result of a combination of different vehicles, you should check out the other web pages of the site for the many more components that can give you great ideas for modifying you vehicle! Our catalog lists both specific vehicle components and universal components applicable to hot rods and custom vehicles. Several colors of polyurethane are available- including black.

Don't let ugly and rotting rubber take away from the appearance, performance and handling of the vehicle you're so proud of!

EARLY G.M. STYLE MOTOR MOUNTS

*Features a built-in "torque ready" safety interlock (see photo)
*Soft enough to absorb vibrations for street use yet rugged enough for racing.
*Impervious to automotive fluids that destroy ordinary rubber mounts
*Made of HYPER-FLEXTM
*In several colors.

Great for show vehicles! They fit 90%+ of the street rods "hot rods" with Chevy motors as well as 1963-'82 Chevy 6 & 8 cyl. rear wheel drive vehicles (both small and big block).
** CHECK YOUR MOUNTS- THEY MAY BE WORN! ** These are the first and only polyurethane motor mounts available with a safety interlock, to effectively control higher horsepower and torque! They're high-performance, "bullet-proof" strong, yet as smooth running as O.E.M./stock mounts. Your best and only alternative to solid metal mounts! Impervious to automotive fluids. Choose from either chrome or zinc plated metal.

Two sizes are available. Two per vehicle are required. At the left- "Short and Wide Size": Zinc Plated # 3-1114 or Chrome # 3-1115. At the right- "Tall and Narrow Size": Zinc Plated # 3-1117 or Chrome # 3-1118.

 

  

 

TRANSMISSION MOUNTS

*Effectively controls transmission torque better than stock units, especially in high-performance applications.
*Soft enough to absorb vibrations for street use yet rugged enough for racing. (Commonly used in stock car and drag racing.)
*Helps control torque on heavy horsepower cars. *Maintains proper drive shaft angle.
*Made of HYPER-FLEXTM.
*In several colors.
(Shown- the model for G.M. vehicles. Also available for Ford Co. and Chrysler Co. vehicles.)

Our replacement transmission mounts are the best of both worlds. Soft enough for street use, yet strong enough for racing or off-road use. The mounts for General Motors and Fords have a unique, metal safety locking feature, effectively controlling torque. This feature delivers the extra strength to resist problematic torque forces. Unfortunately, G.M. still is using a rubber version of this mount without a safety locking feature (the same type since 1956). We believe all of our mounts are superior to original factory types. Depending on the vehicle, the G.M. mounts can be used on both automatic transmissions and manual three, four, and five speeds. The interlocking feature of the mount gives added confidence against drive train and frame damage. Get our new catalog for vehicle/transmission applications, call your dealer or see the illustration below and simply measure your mounts to match the measurements shown. One is required per vehicle. Shown below are the G.M. style mount on the left and the Ford style on the right.

 

 
 

LINK BUSHINGS FOR 4 BAR SYSTEMS

*Available in 5 bushing & sleeve sizes.
*Made of HYPER-FLEXTM.
*In from several colors.

Commonly found on various applications. Also fits common 4 bar systems. Set includes 4 bushings and 2 sleeves.

 MUSTANG II SUSPENSION COMPONENTS

Available:
*Front Control Arm Bushing Set
*Front Strut Rod Bushing Set
*Rack And Pinion Bushing Set
*Made of HYPER-FLEXTM.
*In several colors.

Ford Mustang II suspensions are commonly found "under" street rods and kit cars. Energy Suspension's HYPER-FLEXTM performance polyurethane components will deliver the performance handling you should demand.

 

TIE ROD & BALL JOINT BOOTS

*Replace just your torn boots, not the whole tie rod!
*Made of HYPER-FLEXTM.
*Several sizes available for an exact fit.
*In several colors.

Now you can replace the tie rod boot without buying an entire costly tie rod assembly! The tire rod boots incorporate a five point sealing-action design. Both boots for tie rods and ball joints better seals-in lubricant and seals-out contaminants that will ruin your tie rods and ball joints. They look great and last longer than O.E.M. rubber boots, too. CONTEST!

Please select the page of your choice below:

HOME PAGE - WHO ARE OUR CUSTOMERS - OUR PRODUCTS AT WORK, THE PROBLEM & CURE - PERFORMANCE & DURABILITY - PRODUCTS #1 - PRODUCTS #2 - PRODUCTS #3 - PRODUCTS #4 MOTORCYCLE - HOT ROD - INNOVATIONS - CATALOG & PROMO ITEMS - LATEST INFO & QUESTIONS - NEW PRODUCTS 1 - NEW PRODUCTS 2
HEAVY DUTY TRUCK & SERVICE VEHICLE WEB SITE

 

Hart's Auto 8451 Lake St. Omaha, Ne 68134 USA --- Phone 1(402) 398-1368
--- Fax 1(402) 398-1419 --- E Mail- sales@hartsauto.com --- Web Site-http://www.hartsauto.com ---